mining equipment
Car Dumper Hydraulic High Level Unloader, MG1.7 Mine Cart Tipping Discharger, Side Gangue Dumper For Conveyor Truck, Easy Maintenance Underground Mining Ore Unloading Device
This Car Dumper hydraulic high-level car dumper is special lifting and unloading equipment for underground mines, specially matched with MG1.7 fixed-box mine cars for gangue and ore discharging work. It can lift the whole mine car and tilt sideways to stably unload gangue and ore onto belt conveyors...
CAGE SAFETY DOOR Vertical Shaft Safety Gate, Mine Shaft Collar Safety Door, Cage Barrier with Rocking Platform & Stopper Interlock Anti-Misoperation Lock for Mine Hoist Equipment
This CAGE SAFETY DOOR is a special safety protection equipment for vertical shaft mine hoisting systems, suitable for all operation scenarios including vertical shaft collar, shaft bottom and intermediate transport drifts. It is equipped with a complete intelligent signal interlock control system, ...
CABLE CAR Inclined Shaft Man Car Winch Traction Personnel Vehicle Dual Brake Rail Buffer Safety Haulage Car Coal Mine Inclined Roadway ≤40° Underground Mining Passenger Transport Equipment
The inclined shaft man car is suitable for inclined shafts with an angle of inclination not exceeding 40 degrees. This model of man car is used for winch traction to safely and reliably transport personnel in the inclined shaft. The braking and rail-gripping part of this man car model consists of ...
BACKDRAFT DAMPER MFHSL Pressureless Air Door Mine Belt Conveyor Anti-Backflow Air Door Auto Close Vent Damper Intake Return Roadway Crosscut Wind Isolation Mining Ventilation Safety Equipment
This BACKDRAFT DAMPER belt conveyor anti-backflow air door belongs to MFHSL series pressureless air doors, widely used for ventilation isolation at crosscuts of underground main intake airways, return airways and connecting roadways in coal mines. The product features ultra-low opening resistance, ...
Filter Press
A filter press is a core piece of equipment that utilizes mechanical pressure to achieve efficient solid-liquid separation. It is widely used in industries such as mining, metallurgy, chemical engineering, environmental protection, and municipal sludge treatment. By forming a sealed filter chamber ...
Hydrocyclone
A hydrocyclone is a highly efficient separation device that utilizes the principle of centrifugal sedimentation for solid-liquid separation, classification, and thickening. Under pressure, the material enters the cylindrical body tangentially and rotates at high speed. Coarse and heavy particles, ...
CLEARANCE SALE MACHINE
Main Features: Long conveying distance, low requirement for concentration and liquid level, insensitive to particle size CLEARANCE SALE MACHINE Component Name Parameter Name Parameter Specification Main Unit Overall Dimensions (L x W x H) 4000 x 1520 x 1700mm Weight 6T Control Method Hydraulic ...
SUSPENDED SINGLE HYDRAULIC PROP FOR MINING
Main Features: The technical features of the suspended single hydraulic prop include high working resistance, relatively light weight, long design service life, large working stroke, low maintenance costs, operational convenience, and good stability. Its structural design avoids load-bearing welds ...
Ball Mill
The ball mill is the core equipment for fine grinding of industrial materials after crushing. Its main body is a horizontal rotating cylinder containing grinding media such as steel balls and ceramic balls. When the cylinder rotates, the media are lifted to a height and then dropped, grinding ores, ...
Retractable Runaway Car Protection Device
Main Features: This device is used in all single-track or double-track inclined tunnels with a slope of less than 30 degrees in coal mines, metal mines, non-metal mines, etc. It features fully automated control and monitoring, effectively preventing mine runaway car accidents. This device consists ...
PNEUMATIC MONORAIL HOIST
The pneumatic monorail hoist is mainly used for transporting materials, equipment, and equipment components weighing less than 5 tons in the advance support roadways at the upper and lower ends of the fully mechanized mining face in underground coal mines. It can also be installed and used in other ...
PNEUMATIC MONORAIL HOIST
The pneumatic monorail hoist is mainly used for transporting materials, equipment, and equipment components weighing less than 5 tons in the advance support roadways at the upper and lower ends of the fully mechanized mining face in underground coal mines. It can also be installed and used in other ...
TWO-SPEED WINCH
Main Features: This winch can be used for auxiliary transportation work such as the relocation of fully mechanized mining equipment and various electromechanical equipment in underground coal mine working faces. It can also be used for mine car dispatching and material transportation in underground ...
FIXED BELT CONVEYOR
Main Features: The DTL series universal fixed belt conveyor is mainly used for transporting raw coal in the main roadways or 集中 transport roadways of underground coal mines. Depending on the gradient changes of the roadway, brakes and backstop devices can be added. It can also be used for open-pit ...
GAS DRAINAGE SYSTEM
Main Features: Due to the robust shrink-fit assembly between the shaft and the impeller bore, as well as the high safety factor of the shaft and bearings, this type of pump possesses exceptionally high reliability. The use of welded impellers, with fully machined hubs and blades, fundamentally ...
WELL DRILLING WINCH
Main Features: The shaft drilling winch is mainly used for hoisting hanging discs, water pumps, air ducts, compressed air cylinders, grouting pipes, and other sinking equipment, as well as for tensioning and stabilizing ropes during the shaft sinking process of coal mines, metal mines, and non-metal ...
Circular Vibrating Screen
The YSC series circular vibrating screen is a new type of vibrating screening machinery independently developed by our company, drawing on the advantages of the YA and YK series circular vibrating screens. It uses the company's patented side-plate vibration motor (Patent No.: 200520097098.3) as the ...
Crusher
vv Crushers are core material crushing equipment in fields such as mining, building materials, metallurgy, and infrastructure. Through mechanical forces like compression, impact, and shearing, they break down large chunks of ore, rock, construction waste, and other raw materials into particles that ...
Thickener:
A thickener is a solid-liquid separation device based on the principle of gravity sedimentation. By increasing the sedimentation area and slowing down the water flow velocity, it enables the natural sedimentation and concentration of solid particles in the slurry. This process forms clear overflow ...
PERSONNEL POSITIONING SYSTEM Main Features:
The system is based on Ultra-Wideband (UWB) communication and identification positioning technology. It consists of positioning system software, industrial ring network switches, personnel positioning substations, personnel identification cards, information-enabled miner's lamps, and handheld search ...
BURIED SCRAPER CONVEYOR
Main Features: The MS-type buried scraper conveyor is a continuous conveying equipment that transports powdery, small granular, and small lump bulk materials by means of a moving scraper chain within a closed rectangular housing. Because the scraper chain is completely buried in the material during ...
IEXCAVADORA MINERA
Main Features: The roadway repair machine (also known as a roadway maintenance machine) is a multifunctional crawler-type surrounding rock repair equipment designed specifically for underground engineering such as coal mine shafts. Its core function is to address roadway deformation issues like roof ...
BACKHOE LOADER Key Features:
Adopts an electric full-hydraulic control system, with the electrical system utilizing a reduced-voltage starting method, making it suitable for construction in long tunnel conditions; the hydraulic system features an optimized design where main actions are controlled by pilot valves, ensuring easy ...
Mine Hoist Winch Key Features:
The JD-type mine hoist winch is mainly used for scheduling, train assembly operations, and other traction transportation tasks in the inclined roadways and small shafts of coal mines, metal mines, and non-metal mines. The winch consists of an electric motor, drum device, braking system, and base. It ...
