Solar Energy
CABLE CAR
Main Features: The inclined shaft man car is suitable for inclined shafts with an angle of inclination not exceeding 40 degrees. This model of man car is used for winch traction to safely and reliably transport personnel in the inclined shaft. The braking and rail-gripping part of this man car model ...
CABLE CAR
Main Features: The J-type monkey car, formally known as a mine aerial ropeway, is primarily used in underground mines. It operates by installing a wire rope onto the drive wheel, rope-supporting wheels, rope-pressing wheels, and the return wheel. After being tensioned by a tensioning device, the ...
BROADCAST VOICE SYSTEM
Main Features: The KXB127 mine audio-visual voice alarm is mainly used in explosive gas environments underground in coal mines, for signaling and audio-visual alarming at the entrance, exit, or junctions of transport roadways. It can also be used for audio-visual alarming in shaft hoisting. In ...
BACKDRAFT DAMPER
v Pressureless air doors are used in every crosscut between underground intake and return airways, as well as between main intake and return airways. They require minimal force to open, eliminate the need for additional reverse air doors, and can close automatically after personnel or vehicles pass ...
LOCAL FAN
Composite Material Air Duct: Polyurethane air duct is a positive pressure ventilation duct made of polyurethane composite materials, mainly used for ventilation at excavation faces in engineering fields such as mines and tunnels. Its core structure typically includes a rigid outer shell, a body ...
REFUGE CHAMBER
Main Features: A refuge chamber refers to a dedicated underground roadway chamber with emergency shelter functions, located on disaster avoidance routes in bottom yards, main horizontal entries, and mining areas (panel areas). It serves the entire mine, a specific level, or a mining area, with a ...
ELECTRIC LOCOMOTIVE
v Key Features: This electric locomotive is suitable for use in the main transport roadways of general metal mines or low-gas coal mines with intake air (full pressure ventilation). It is used to haul mine cars and transport raw coal, ore, gangue, materials, equipment, personnel, etc.
IRIS RECOGNITION SYSTEM
Key Features: The TSK iris and face recognition system adopts a deep fusion mode of "iris + face". By utilizing deep learning recognition algorithms, it resolves the issue of recognition failure due to miners' faces being blackened by underground work. Through the application of iris and face ...
Gauge Tie Rod
vvvvv T he gauge tie rod is a key transverse connecting component of railway tracks. Installed at the bottom of the steel rails, it firmly connects the left and right rails. Its core function is to resist the lateral wheel-rail forces, prevent the gauge from expanding or shrinking, and enhance the ...
Rail Turntable
A rail turntable (also known as a car turntable, rail turner, or rotating platform) is a type of mechanical equipment used to change the traveling direction of rail vehicles (such as mine cars, locomotives, engineering vehicles, etc.). It is widely applied in fields such as mining, railways, tunnel ...
Feeder
The GZT series grizzly feeder is a new type of feeding equipment that uses a vibration motor as the excitation source. It is widely used for feeding before coarse crushing in the hydropower industry, construction aggregates, and metallurgical mining. This series of feeders features adjustable gap ...
Flotation Machine:
The flotation machine is a key separation device that utilizes differences in the physicochemical properties of mineral surfaces to achieve mineral separation. By introducing air into the ore pulp to form a large number of bubbles, target minerals — regulated by reagents to be surface-hydrophobic — ...
INTRINSICALLY SAFE HAULER
v Main Features: Underground transport vehicles are the core transportation equipment for underground mines such as coal mines and metal mines. They undertake the efficient transfer of coal, gangue, materials, and personnel, serving as the "artery" of underground production. Trackless Underground ...
ELECTRIC LOCOMOTIVE
Main Features: The explosion-proof special battery electric locomotive is suitable for use in the main transport roadways with intake air (full-pressure ventilation) in high-gas mines, in drivage rock roadways, in the main return air roadways of gas mines, in the intake and return air roadways of ...
Car Dumper
v Main Features: The hydraulic roller cage car dumper consists of a roller cage, car stopper, drive device, locking mechanism, base frame, hydraulic system, and electrical control system. It is driven by a low-speed, high-torque hydraulic motor. Wheel counting devices and car stopper closing ...
Symmetrical Turnout
Symmetrical turnout is a type of narrow-gauge railway turnout used in Chinese coal mines, serving as basic equipment for connecting narrow-gauge railway lines. The standardization and serialization of symmetrical turnouts are also very important for the design, construction, and production of coal ...
GROUND-TYPE RUNAWAY CAR PROTECTIVE DEVICE
vv Main Features: The runaway car protection device, also known as the inclined shaft anti-runaway car installation device, is a critical safety equipment for hoisting transportation in coal mine inclined shafts. Installed in the underground inclined roadways of coal mines, it utilizes position ...
SMALL AND MEDIUM-SIZED
vv SCRAPER CONVEYOR Main Features: The telescopic series belt conveyor is mainly used for raw coal transportation in the troughs or drifting roadways of underground coal mines. It features belt storage and retraction capabilities. The intermediate frame adopts a boltless tubular structure, making it ...
MINER'S LAMP CHARGING CABINET
vvv Key Features: The intelligent miner's lamp charging cabinet realizes automatic statistics, reporting, attendance tracking, and whole-process dynamic real-time management of miner's lamps from racking, charging, to un-racking. It provides rapid, accurate, and comprehensive information in real...
Classifier
The classifier is a key piece of equipment used for material particle size classification in industries such as mining, building materials, and chemical engineering. It is mainly paired with ball mills to form a closed-circuit grinding system. Through the action of gravity, centrifugal force, or ...
VEHICLE OPERATION SYSTEM
The mine car handling system is a core supporting equipment for hoisting and transportation in shafts (especially auxiliary shafts). It is mainly deployed at the shaft collar and bottom yard to achieve precise dispatching, loading/unloading, positioning, and locking of mine cars. It connects cage ...
DIESEL LOCOMOTIVE
Main Features: Diesel steel-wheel narrow-gauge locomotive products are powered by diesel engines. This series of locomotives is more flexible and mobile than battery-powered locomotives, requiring no overhead catenary, AC power, or charging equipment. They feature low operating costs, convenient ...
MINE WET DUST REMOVAL FAN
Main Features: The wet dust removal fan for coal mines consists of a flameproof exhaust local ventilator for coal mines and a wet vibrating string dust collector (also known as a wet fiber grid dust collector). The equipped fan can be selected from axial, centrifugal, or mixed-flow series of ...
Mine Hoist Winch Key Features:
The JD-type mine hoist winch is mainly used for scheduling, train assembly operations, and other traction transportation tasks in the inclined roadways and small shafts of coal mines, metal mines, and non-metal mines. The winch consists of an electric motor, drum device, braking system, and base. It ...
